New Holland P2050 - Manual

New Holland
Air Hoe Drill Specifications
P2050
Page 1 of 2
3-SECTION MODEL, ft. (m) 27 (8.2) 28 (8.5) 33 (10.1) 34 (10.4) 39 (11.9) 40 (12.2)
DIMENSIONS
Transport, ft. (m)
Length 29 (8.8) 29 (8.8) 29 (8.8) 29 (8.8) 29 (8.8) 29 (8.8)
ft. in. (m) Height 11’ 6” (3.5) 11’ 6” (3.5) 14’ 6” (4.4) 14’ 6” (4.4) 17’ 6” (5.3) 17’ 6” (5.3)
ft. in. (m) Width 20’ 6” (6.2) 20’ 6” (6.2) 20’ 6” (6.2) 20’ 6” (6.2) 20’ 6” (6.2) 20’ 6” (6.2)
NUMBER OF SHANKS
Spacing, in. (cm)
7.2 (18.3) 45 — 55 — 65 —
in. (cm) 10 (25.4) — 34 40 — — 48
in. (cm) 12 (30.5) — 28 — 34 — 40
5-SECTION MODEL, ft. (m) 45 (13.7) 46 (14.0) 51 (15.5) 52 (15.8) — —
DIMENSIONS
Transport, ft. (m)
Length 29 (8.8) 29 (8.8) 29 (8.8) 29 (8.8) — —
ft. in. (m) Height 13’ 6” (4.1) 13’ 6” (4.1) 17’ 6” (5.3) 17’ 6” (5.3) — —
ft. in. (m) Width 20’ 6” (6.2) 20’ 6” (6.2) 20’ 6” (6.2) 20’ 6” (6.2) — —
NUMBER OF SHANKS
Spacing, in. (cm)
7.2 (18.3) 75 — 85 — — —
in. (cm) 10 (25.4) — 56 62 — — —
in. (cm) 12 (30.5) — 46 — 52 — —
TIRES
P2050 CONFIGURATION ft. (m)
27, 28, 33 and 34 39, 40, 45 and 46 51 and 52
(8.2, 8.5, 10.1 and 10.4) (11.9, 12.2, 13.7 and 14.0) (15.5, 15.8)
Single caster tires on front Dual caster tires on front Dual caster tires on front
(11L-15FI D-rating - 6-bolt hubs) (9.5L-15FI D-rating - 6-bolt hubs) (11L-15FI D-rating - 6-bolt hubs)
Tires on rear walking beams Tires on rear walking beams Tires on rear walking beams
(9.5L-15FI D-rating - 6-bolt hubs) (9.5L-15FI D-rating - 6-bolt hubs) (11L-15FI D-rating - 6-bolt hubs)
Tires on wing sections Tires on wing sections Tires on wing sections
(9.5L-15FI 6-ply - 6-bolt hubs) (9.5L-15FI 6-ply - 6-bolt hubs) (9.5L-15FI 6-ply - 6-bolt hubs)
SPACING
4-row, in. (cm) ....................................................................................................7.2, 10 or 12 (18.3, 25.4 or 30.5) spacings ..................................................................................
FRAME/GROUND CLEARANCE
in. (cm) ..............................................................................................28 to 32 (71.1 to 81.3) depending on openers and depth settings ................................................................
CULTIVATOR-STYLE TRIPS
lb. (kg) in. (cm) ........................................................................350 (160) with 1” x 2” (2.5 x 5.1) shank, 2 1/4” (5.7) centers fit 50° sweeps........................................................
lb. (kg) in. (cm) ........................................................................550 (250) with 1” x 2” (2.5 x 5.1) shank, 2 1/4” (5.7) centers fit 50° sweeps........................................................
PRESS WHEELS
Rubber, in. (cm)......................................................................................................................3 x 22 (7.6 x 55.9)......................................................................................................
in. (cm) ..................................................................................................................................4 x 22 (10.2 x 55.9).....................................................................................................
in. (cm).................................................................................................................................5 1/2 x 22 (14 x 55.9) ...................................................................................................
Steel, in. (cm) ......................................................................................................................3 1/2 x 22 (8.9 x 55.9)...................................................................................................
in. (cm) ...............................................................................................................................4 1/2 x 22 (11.4 x 55.9)..................................................................................................
OPTIONS .........................................................................................................Shim kits to lower shanks behind tractor wheels ..............................................................................
.........................................................................................................................................Single or dual end markers ...............................................................................................
..........................................................................................................................................Press wheel mud scrapers................................................................................................
.............................................................................................................................................Tow hitch for NH3 cart...................................................................................................
...................................................................................................................................Bolt-on caps for steel press wheels.........................................................................................
............................................................................................................................1-bar heavy harrow for 4-row configuration ..................................................................................
................................................................................Dual offset caster for the center section of 27’, 28’, 33’ and 34’ (8.2, 8.5, 10.1 and 10.4 m) models......................................
......................................................................................................................Dual offset caster for the wing sections (all models) ...........................................................................
ASAE 279.11 transport lighting is standard equipment