New Holland Boomer 1025/T1030 - Manual

New Holland Boomer ™ 1000 & T1000 Series
Sub-compact Tractor Specifications
Boomer 1020 Boomer 1025 T1010 T1030
Page 1 of 1
MODEL Boomer 1020/T1010 Boomer 1025/T1030
ENGINE
Gross engine hp (kW)
20 (14.9) 26 (19.4)
PTO hp (kW) 15.5 (11.6) 19.7 (14.7)
Rated speed, rpm 3000 3000
Cylinders 3 3
Displacement, cu. in. (L) 58.2 (.95) 69.0 (1.1)
Fuel capacity, gal. (L) 7.1 (26.9) 7.1 (26.9)
TRANSMISSIONS
Hydrostatic transmission
2-speed 2-speed
Min/Max forward speed
with R4 tires, mph (k/hr) 0-10.3 (16.6) 0-10.3 (16.6)
BRAKES
Location
.........................................................Single LH side .........................................................
Type ..............................................................Wet disc ..............................................................
POWER TAKE OFF (PTO)
Rear
540 540
Mid 2200 2200
HYDRAULICS
Pump type
Gear Gear
System type ...........................................................Open center ...........................................................
Pump capacity, gpm (lpm)* 5.6 (21.2) 5.6 (21.2)
Implement flow, gpm (lpm) 3.75 (14.20) 3.75 (14.21)
Steering priority flow, gpm (lpm) 1.85 (7.0) 1.85 (7.0)
3-point hitch lift capacity,
24 in. behind the lift balls, lb. (kg) 700 (318) 700 (318)
3 point hitch control .....................................................Self centering valve .....................................................
*@ rated speed
AXLE OPTIONS
FWD
Standard Standard
Sensitrak™ Auto FWD NA Optional
DIMENSIONS (with R4 tires)
Overall length witih 3-point hitch,
in. (mm) 96.3 (2445) 96.3 (2445)
Overall width (minimum), in. (mm) 46.4 (1180) 46.4 (1180)
Wheelbase, in. (mm) 55.1 (1400) 55.1 (1400)
Height to top of ROPS, in. (mm) 72.4 (1840) 72.4 (1840)
Ground clearance 7.3 (185) 7.3 (185)
Shipping weight w/R4 tires, lbs. (kg) 1455 (660) 1455 (660)
TIRE OPTIONS
Turf Tires
Front .................................................18x8.5-8, 4 PR (R3) Turf.................................................
Rear ................................................26x12-12, 4 PR (R3) Turf ................................................
Industrial Tires
Front ..................................................18x8.5-8, 4 Pr (R4) Ind ..................................................
Rear .................................................26x12-12, 4PR (R4) Ind .................................................
STANDARD EQUIPMENT: OPTIONAL EQUIPMENT:
• Toolbox FRONT ATTACHMENTS MID-MOUNT ATTACHMENTS REAR ATTACHMENTS
• Cup holder • Loader • 60” mid-mount mower • Finishing mowers
• Foldable ROPS • Quick-attach snow blower • Grass catcher • Rotary tiller
• 12 Volt accessory power outlet • Quick-attach rotary broom • Ballast box
• Quick-attach front blade
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machiner y
without all shields, protective devices
and structures in place.
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
var y outside these areas.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).