New Holland 255 - Manual

New Holland
Tedders / Rake Tedder
157 163 H5270 / 255
Page 1 of 1
TEDDER SPECIFICATIONS 157 163 163 H5270
MANUAL FOLD HYDRAULIC FOLD HYDRAULIC FOLD
Number of rotors 2 4 4 6
Tines per rotor 6 6 6 7
Overall width in operating position, ft. in. (m) 10' 2" (3.10) 17' 8" (5.38) 17' 8" (5.38) 25' 7" (7.8)
Tedding width, ft. in. (m) 8' 6" (2.60) 16' 5" (5.0) 16' 5" (5.0) 27' 7" (8.4)
Transport width, ft. in. (m) 8' 0" (2.40) 9' 2" (2.79) 9' 2" (2.79) 9' 10" (3)
Weight, lbs. (kg) 441 (200) 986 (447) 950 (431) 1874 (850)
Tires 15 x 6 x 6 15 x 6 x 6 15 x 6 x 6 Two 18 x 8.50 - 8 center/
Four 16 x 16.50 - 8 outer
PTO Tractor requirement, hp (kW) 15 (11) 20 (15) 20 (15) 35 (26.1)
PTO slip clutch Standard Standard Standard Standard
Tractor attachment 3-point Towed Towed Towed
Tractor remote valves required none none one one
Safety Tow Chains N/A Standard Standard Standard
RAKE TEDDER SPECIFICATIONS 255
Number of rotors 2
Arms per rotor 6
Tines per arm 2 double tines
Tedding width, ft. in. (m) 10' 6" (3.20)
Raking width, ft. in. (m) 10' 6" (3.20) to 13' 1-1⁄2" (4.00)
Transport width, in. (m) 10 (3.05)
Weight, lbs. (kg) 897 (407)
Tires 15 X 6 X 6, 4-ply
Tractor requirement, hp (kw) 30 (22.3) and 540 rpm PTO
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machiner y
without all shields, protective devices
and structures in place.
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
var y outside these areas.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).