New Holland Super Boom C190 - Manual

New Holland Super Boom
™
Compact Track Loader Specifications
C175 C185 C190
Page 1 of 1
MODEL C175 C185 C190
ENGINE
Make and model
New Holland N844LT New Holland 334T/M2 New Holland 445/M2
Fuel ..................................................................................................................................................................Diesel.................................................................................................
Gross power @ RPM, hp (kW)
60 (45) @ 2900 78 (58) @ 2300 80 (60) @ 2300
Net power @ RPM, hp (kW) 56 (42) @ 2900 72 (54) @ 2300 74 (55) @ 2300
Peak torque, lb.-ft. (N-m) @ RPM 128 (174) @ 1700 228 (309) @ 1400 236 (320) @ 1400
Number of cylinders 4 3 4
Displacement, cu. in. (l) 135.3 (2.2) 205 (3.4) 274 (4.5)
Aspiration Turbocharged Turbocharged Natural
Cooling type.......................................................................................................................................................Water.................................................................................................
DRIVE TRAIN
Max travel speed- forward, mph (kph)
7.4 (11.9) 8 (12.9) 8 (12.9)
Width over tracks, in. (mm) 71.1 (1810) 82.4 (2090) 82.4 (2090)
Track width, in. (mm) 12.6 (320) 17.7 (450) 17.7 (450)
HYDRAULICS
System type .......................................................................................................................................................Open .................................................................................................
Main pump type .................................................................................................................................................Gear..................................................................................................
Total flow, gpm (l/min)
17.2 (65.1) 19.3 (73.1) 21.9 (82.9)
Main relief pressure, psi (bar) 2,550 (176) 3,050 (210) 3,050 (210)
Optional high flow, gpm (l/min) 25.5 (96.5) 34.7 (131.3) 37.3 (141.2)
PERFORMANCE
LOADER ARMS
Linkage geometry ..........................................................................................................................................Vertical lift.............................................................................................
Rated operating load (35% of tipping load), lbs. (kg)
2,200 (998) 2,500 (1134) 2,900 (1316)
Straight tipping load, lbs. (kg) 6,300 (2858) 7,286 (3305) 8,286 (3759)
Bucket breakout force, lbs. (kg) 4,312 (1956) 7,670 (3479) 7,670 (3479)
Max dump angle at full height, degrees 43 45 45
Dump clearance at full height discharge, in. (mm) 95 (2410) 100 (2540) 101.9 (2590)
Dump reach at full height discharge, in. (mm) 30.7 (780) 32.7 (830) 32 (810)
Max hinge pin height, in. (mm) 119.2 (3030) 124.7 (3170) 125.6 (3190)
Bucket rollback at carry position, degrees...........................................................................................................37 ...................................................................................................
DIMENSIONS
Length with bucket down, in. (mm)
129.5 (3290) 140 (3560) 148.5 (3770)
Width w/bucket, in. (mm) 72 (1830) 84 (2130) 84 (2130)
Height to top of cab, in. (mm) 75.4 (1920) 78 (1980) 79.6 (2020)
Ground clearance, in. (mm) 7.9 (200) 10.1 (260) 10.1 (260)
OTHER FEATURES
Standard ROPS .............................................................................................................................................Tilt forward ............................................................................................
Self leveling bucket .............................................................................................................................................Std. .................................................................................................
OPERATING WEIGHTS
Operating weight, lbs. (kg)
7,535 (3418) 9,155 (4153) 9,811 (4450)
SERVICE CAPACITIES
Fuel tank, gal. (l)
14.4 (55) 18 (68) 21.5 (81)
Cooling system, gal. (l)....................................................................................................................................4.5 (17)...............................................................................................
Hydraulic system total, gal. (l)
8.6 (33) 15 (57) 15 (57)
C175 - Equipped with 72" dirt and foundry bucket and 12.6" track belt width
C185/C190 - Equipped with 84" dirt and foundry bucket and 17.7" wide track belt width
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machiner y
without all shields, protective devices
and structures in place.
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
var y outside these areas.
© 2008 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Visit our Web site at www.newholland.com/na. Or, call toll-free 866-NEW-HLND (866-639-4563).