NETGEAR RangeMax 240 Wireless MIMO USB 2.0 Adapter WPNT121 - Manual (Page 32)

NETGEAR RangeMax™ 240 Wireless USB 2.0 Adapter WPNT121 User Manual
3-10
v1.0, February 2006
Setting up WEP Encryption Security
Follow the steps below to configure WEP Encryption Security.
1. Run the Wireless USB 2.0 Adapter Smart Wizard.
a. Make sure the software is installed and the Wireless USB 2.0 Adapter is connected to the
USB port in your computer.
b. Use the icon to open the Smart Wizard. The Settings tab page opens.
2. Configure the Security settings.
a. In the Profile box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c. In the Security section, select WEP.
Figure 3-7
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.