NEC NP4001/NP4000 - Manual (Page 78)

5. Using On-Screen Display
66
q Source Menu Descriptions and Functions
The Source menu displays all supported image sources.
Select the required source from the menu using ▲ or ▼ and press Enter to confirm.
I
TEM
D
ESCRIPTION
Computer 1
Select the source connected to the Computer 1 input
(see Connecting Your PC or Macintosh Computer on page
31 ).
Computer 2
Select the source connected to the Computer 2 input
(see Connecting Your PC or Macintosh Computer on page
31 ).
Computer 3
Select the source connected to the Computer 3 input
(see Connecting Your PC or Macintosh Computer on page
31 ).
Component
Select the source connected to the Component input
(see Connecting Your DVD Player with Component Output on
page
34 ).
Video
Select the source connected to the Video input
(see Connecting Your VCR or Laser Disc Player on page
35 ).
S-Video
Select the source connected to the S-Video input
(see Connecting Your VCR or Laser Disc Player on page
35 ).
Note:
If an XGA signal is not correctly recognized on NP4001, set "WXGA Mode" to Off.
(see page
72 ).
To check if the signal is recognized, go to "Source" under "Information" menu.
(see page
97 )