Nikon LS-2000 - Manual (Page 47)

- 47 - Using the Scanner: Using the SF-200 Slide Feeder
To use the attachment utility, open the Utility folder in the
folder to which you installed Nikon Scan and double-click the
Attachment Utility icon to start the attachment utility.
The attachment utility window will appear on the desktop. If
more than one scanner is attached to your computer and
powered on, select the scanner to which the SF-200 is attached
from the select a scanner pop-up menu.
If the feed mechanism has locked while pushing a slide, click the
double left-arrow button in the attachment utility window to
move the feed mechanism back to its housing, then remove the
jammed slide with your fingers. If two or more slides have
jammed so that they overlap, remove the slide on the magazine
side first. If the mount has caught at the entrance to the ejec-
tion magazine while being ejected from the feeder, click the
right arrow button to move the feed mechanism out of the
way, then push the slide back gently back towards the scanner
to clear the jam. Using the left-arrow button, return the feed
mechanism to its housing (if this does not clear the jam, you will
need to take the feeder to a Nikon service center for repairs).