NextBase SDV37-SD User Manual
Page 31
USING THE BATTERY
AC power operation
Turn off the power of the player.
.
Turn the battery knob anti-clockwise to remove battery pack
1
Connect the DC output plug of the AC
adapter to the DC IN jack on the player.
Connect the AC adapter to a power
outlet.
Now the player can be operated.
Be sure to use the AC adapter provided
with the player.
Before inserting or removing the DC
output plug of the AC adapter, always
be sure to turn off the power of the
portable DVD player.
CAUTION:
Removing the batter y pack from the player
The ba ttery pac k can be remove d from th e player as desc ribed be low.
If the power is switched on while the battery pack is
not fully charged, the player operation may
sometimes become unstable. Be sure to charge the
battery pack fully before using.
The battery pack is being recharged slowly while the
player is playing with AC adapter connected.
The battery pack is being recharged as recharged
separately while the player is at STAND BY mode
with AC adapter connected.
After connecting the battery pack and power on,
press OSD button on remote control at PLAY,
PAUSE or STOP status to show symbol"
".
This symbol indicates the capability of the battery
pack.
While the battery pack has lower capacity, "
"
will be flashed to remind you.
ENG
29
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建