NetComm NB1 - Manual (Page 26)

NB1 User Guide YML780 Rev1
26 www.netcomm.com.au
PPPoE Connection Setup
PPP Settings
Option Description
Username: Enter the username provided by your
ISP.
Password: Enter the password provided by your
ISP.
Idle Timeout: Idle timeout means the router will
disconnect after being idle for a preset
amount of time. The default is 60 sec-
onds. If you set the time to 0, the ADSL
connection will remain always connected
to the ISP.
Keep Alive: If mode is LCP, This is the Keep Alive
timer. If a reply to the LCP echo is not
received in this amount if time, the con-
nection is dropped. The Default is 10.
Authentication: Default is Auto. However, if your ISP
asks you to specify the authentication
type, you can select it here (CHAP or
PAP).
MTU Maximum Transmission Unit indicates
the largest packet size in bytes that the
modem transmits. Any packets larger
than the MTU setting are fragmented
into smaller packets before being trans-
mitted.