NEC XT5000 - Manual (Page 7)

E – 7
INTRODUCTION
This section introduces you to your new MultiSync XT5000 Projec-
tor, provides a list of materials that comes with your projector and
describes the features and controls.
Congratulations On Your Purchase Of The
MultiSync XT5000 Projector
The MultiSync XT5000 is one of the finest, most technically advanced
projectors available today. The XT5000 enables you to project excep-
tionally bright, precise images up to 500 inches across (measured di-
agonally) from your PC or Macintosh computer (desktop or notebook),
VCR, document camera, laser disc player, DVD player and even an
HD VCR or HD laser disc player.
You can use the projector on a tabletop or cart, you can permanently
mount it on a ceiling*, or you can use the projector to project images
from behind the screen. The remote control can be used in a wired or
wireless configuration.
Features you'll enjoy :
• A high-performance 1.0 KW Xenon lamp that delivers 4500 ANSI
lumens (High Bright mode) and 4000 ANSI lumens (Normal mode)
and lamp life is 1500 hours.
• NEC’s unique DLP TM based light engine offers true color reproduc-
tion.
• XT5000 can accommodate any picture size from 80 to 500 inches
(measured diagonally).
• The XT5000 projects images with uniform brightness while colors
remain true to their original source.
• The projector can be double or even triple stacked without an exter-
nal frame, producing bright images of 9,000 or 13,500 ANSI lu-
mens in addition, double or triple stacking offers built-in redun-
dancy.
• An image can be projected from in front or behind a screen, and the
projector can even be installed on the ceiling*.
• Supports RGB digital, HDTV and DVD signals as well as most
IBM VGA, S-VGA, XGA, SXGA(scaling), Macintosh or any other
RGB signals within a horizontal frequency range or 15 to 83.5 kHz
and a vertical frequency range of 50 to 85 Hz. This includes
NTSC3.58, PAL, PAL60, SECAM, NTSC4.43, Y/C and 1080I,
720P and 480P HDTV standard video signals.
• Built-in telecine detection enables 3:2 pull-down correction with
no external processing necessary, eliminating jitter and artifacts to
allow for original film source motion quality.
• A newly designed menu system provides for easy setup and opera-
tion of the projector.
• The remote control can be used wired or wireless.
* Installing the projector on the ceiling must be done by authorized
NEC technicians.
Consult your NEC dealer for more information.
Digital Light Proccessing and DLP are trademarks of Texas Instru-
ments.
Getting Started
The fastest way to get started is to take your time and do everything
right the first time. Taking a few minutes now to review the manual
may save you hours later on. At the beginning of each section of the
manual you'll find an overview. If the section doesn't apply, you can
skip it.
What's In The Box?
Make sure your box contains everything listed. If any pieces are miss-
ing, contact your dealer. Please save the original box and packing ma-
terials if you ever need to ship the projector.
• NEC MultiSync XT5000 Projector
• Remote Control with Remote Cable (wireless/wired).
• DFP Cable
• Power Cable
• Power Cable Stopper
• Two AAA Batteries
• User Manual