Netac Tech Co. Ltd. - Manual (Page 6)

iMuve
5 6
4) Please select “Search for the best driver for your device. (Recommended)”, and
click “Next” button to continue.
5) Wizard shows where to locate P200 driver. Only select “CD-ROM drive”, and click
“Next” button to continue.
2. Usage on the Computer
P200 has two styles as “Fashion” and “Classic”, this manual would be introduced as
“Fashion” for example.
Connect P200 with the computer through USB cable, Connect standard port of USB
cable with the computer, Mini port with P200. After being connected, the screen of P200
would displayed as following:
2.1 Utilities Installation
Please install driver before using P200, if your system has not installed it previously on
Windows 98/98SE. The installation processes are as the following:
1) Boot your system on Windows 98/98SE.
2) Insert the installation CD into the CD-ROM.
3) Connect P200 with the computer through USB cable, system would find an USB
device automatically. “Add New Hardware Wizard” dialog appears, click “Next”
button to continue.
Fig. 1