Imuve – Netac Tech Co. Ltd. User Manual
Page 18
iMuve
29
30
1)
Scan Mode: Manual, Auto, and Channel. You can press OK button to select.
Manual: Press Previous/Next button to search channel ahead/backwards by
0.1MHz manually in receiving status.
Auto: Press Previous/Next button, P200 would search channel ahead/backwards
by 0.1MHz automatically. P200 would stop searching automatically while searched
channel.
Channel: You can switch channel by pressing Previous/Next button if there is
more than one channel saved.
Press MENU button to enter popup menu in receiving status, press Previous/Next
button to select item, and press OK button to set item or confirm.
2)
Auto Search: Press OK button to start searching automatically, P200 would save
the searched channels automatically. Press MENU button to enter popup menu
in searching status, press Previous/Next button to select “Stop/Return”, and press
OK button to confirm.
3)
Save Channel: Save the current channel to channel list (Max. 100 channels). If
“Scan Mode” is set as “Channel”, this item would display “Delete Channel”.
4)
Frequency band: Europe and Japan.
5)
FM Recording: Press OK button to start recording. Press MENU button to enter
popup menu in recording status, press Previous/Next button to select “Stop” to
stop recording, and press OK button to confirm. P200 would save the recorded
file automatically under “Recorder” folder after being stop recording, and name for
the recorded file as “Fm****-******.wav” and played it in “Recorder” menu. Please
refer to “4.8 Recorder” for details.
NOTE: P200 would stop recording and save the recorded file automatically in FM
recording status, while exit FM menu.
6)
Return: Return to main menu.
7)
Press POWER button to turn off FM radio. Press MENU button to enter popup
menu, press Previous/Next button to select “FM ON” in “FM” menu.
8)
P200 supports multitasking in FM receiving status, the details are as the following:
A)
Enter to “Photo” or “eBook” menu for browse.
B)
Enter to “File” menu of P200 or SD/MMC Card for viewing the information.
C)
Enter to “Recorder” menu for FM recording.
D)
Enter to “Setup” menu for setting items of system.