Newcon Optik NVS 6 - Manual (Page 37)

36
Power cable connectors
are not properly
engaged Reconnect.
Broken power cord,
mount or power pack If power cord is damaged,
return
NVS 6 and/or mount to the
maintainer
Intermittent
operation Defective mount
or goggles Hand over NVS 6 and mount
for maintenance
Poor image
quality
Objective lenses
or eyepiece lenses not
focused correctly or
lenses are fogged or
dirty Adjust the focus of the lenses
or clean them. If the image is
still not clear, or the lenses are
fogged internally, hand over
NVS 6 for maintenance.
Objective lens
cannot be focused Focus mechanism Hand over NVS 6 for
maintenance.
Eye-span
adjustment
cannot be made Defective eye-span
mechanism Hand over NVS 6 for
maintenance.
Goggles will
not lock in
mount Mounting hardware is
dirty or broken Clean the mounting hardware.
If problem persists, the
mechanism is damaged. Hand
over NVS 6 and mount for
maintenance
Visor will not
operate in mount
Visor and mount
improperly installed
Visor link defective
Hand over helmet for
maintenance.
Hand over helmet for
maintenance.