Newcon Optik NVS 6 User Manual
Page 19
18
2.2 OPERATIONAL CHECKOUT PROCEDURES
2.2.1 General
Prior to field operation of the goggles, perform the operational
checkout procedures as per tables 2-2 to 2-4.
2.2.2 Warnings and cautions
Always observe the WARNING and CAUTION appearing in the
tables. Warning and caution appear before applicable procedures.
You must observe the warnings and cautions to prevent serious
injury to yourself and others, or to prevent your equipment from
being damaged.
2.2.3 Explanation of table entries
a) Step. Steps numbers are included to assist you with performing
the checks.
b) Item. This column provides the item to be checked and its
location.
c) Procedure. This column gives the procedure you must perform
to check or service the item, to know if the equipment is ready
or available for its intended mission or for operation.
d) NO-GO criteria. Information in this column tells you what
faults will keep your equipment from being capable of
performing its primary mission. If you make checks that show
faults listed in this column, do not operate the equipment.
Follow standard procedures for maintaining the equipment or
reporting equipment failure.
e) Other table entries. Be sure to observe all special information
and notes that appear in your table.