Nortel Networks C4012 - Manual (Page 11)

13
C 4 0 1 2 H a n d s e t S t a n d a r d 2 . 0 0
Leaving the list:
To leave the list before placing a call, press
o
.
Making a call from the shortcut list
You can store up to 10 frequently called numbers in the speed-dialling
memory. These numbers occupy memory slots 0…9.
To make a call from the shortcut list:
1. While the handset is in idle state, press
P
and the corresponding num-
ber under which the call number is stored.
2. (Optional) To use pre-dial, press
H
for a longer period.
The selected phone number is entered in pre-dial. Add digits to the
beginning of the displayed phone number, as required. To terminate
pre dial, press
C
for a longer period.
3. Press
H
to dial the number.
Answering a call
The ringer and the flashing
h
on the display indicate an incoming call. If
CLID is available, the calling number displays. Without CLID, the display
shows
c .
To answer the call, press
H
or lift the handset from the charger.
To mute the ringer for this call only, press
C
. The
A
icon appears on the
display and the caller continues to hear the ringing tone. To accept the call,
press
H
, if the caller is still connected.
Note: Answered calls are not stored in the caller list.
The
E
icon appears when the incoming call is not answered and the initiator
stops the call. The number is stored in the caller list.
Activate the list to delete the
E
icon from the display.