Nortel Networks 1220 - Manual (Page 36)

Installing your IP Phone 1220
36
Wall-mounting the IP Phone (optional)
You can install your IP Phone on a wall. Wall-mount the IP Phone using
the two keyholes on the back of the IP Phone. You do not need the foot
stand for wall-mounted applications.
1. Remove the foot stand.
2. Ensure all cables are properly routed and the IP Phone is functioning.
3. Make small marks on the wall where you want to align each keyhole
slot.
4. Insert the screws (not provided) so that they protrude slightly from the
wall.
5. Align the keyholes on the back of the IP Phone with the screws in the
wall.
6. Slide the IP Phone onto the screws to secure the IP Phone in
position.