Niles Audio ZR-4630s - Manual (Page 49)

49
CONNECTIONS
CONNECTING AN IR SENSOR FOR LOCAL SYSTEM CONTROL
IR Sensors installed in zones for hand-held IR remote control of the ZR-4630 and its source components can also
be used to control local components (i.e., a TV, DSS, DVD, and a surround-sound system located in the master
bedroom zone as shown in figure 38).
The IR Sensor connects normally to the Solo ™ Master Keypad to control the ZR-4630 and its connected source
components. In addition, the IR Sensor connects to a local IR repeating system (DATA and GND connections
only), to provide control of local components.
Fig. 38
Four Pair Twisted Cable
TV
LR
AUDIO VIDEO
DSS
PHONE DIGITAL
LR
AUDIO VIDEO
DVD
DIGITAL
RECEIVER
LR
AUDIO
CD
DVD
Video 3
Video 2
Video 1
VIDEO FRONT
L
L
R
DIGITAL
1
2 R
CENTER
REAR
L
R
Distributed Equipment Location
IR SENSOR SYSTEM
ACCESSORY
KEYPADS
3-30V
AC/DC
STATUS
IN
1 = STATUS
4 = 12V DC
2 = DATA 3 = GROUND
Niles MSU250
(provided for IR control
of local equipment)
Zone 6 – Master Bedroom
Niles
WS100R
Solo ™
Master
Keypad Module
RJ-45 Connector
for connection to
IR Sensors
Two Conductor
Shielded Cable
(connect DATA and
GND only)
RJ-45 Connector for
connection to
the ZR-4630
Figure 38