National Instruments NI 9215 - Manual (Page 27)

© National Instruments Corp. 27 NI 9215 Operating Instructions and Specifications
equipment, limited-energy parts of equipment, circuits powered by
regulated low-voltage sources, and electronics.
Caution Do not connect the NI 9215 with BNC to signals
or use for measurements within Measurement
Categories II, III, or IV.
Safety Standards
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement,
control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
Note For UL and other safety certifications, refer to the
product label, or visit ni.com/certification , search
by module number or product line, and click the
appropriate link in the Certification column.