Nortel Networks NN43021-110 - Manual (Page 59)

Configuration options 59
The data dump program is also used to install a new generic version or
issue and capture protected data store information (such as speed call
lists) that may be changed by a user.
Software audit
This program monitors system operation and gives an indication of the
general state of the system operation. The program is concerned mainly
with the system software. When a software problem is encountered, the
program attempts to clear the problem automatically.
Configuration options
Large Systems offer the following configuration options to support increased
system redundancy:
• "Fiber Remote IPE" (page 59)
• "Carrier Remote IPE" (page 61)
• "Branch Office" (page 62)
• "Geographic Redundancy" (page 63)
Fiber Remote IPE
Large Systems can be configured in a distributed system to support remote
subscribers, using Remote IPE modules or small cabinets. Fiber-optic
links are used to connect the Remote IPE modules and small cabinets
to the PBXs.
In a distributed system, subscriber connections are the same at local
IPE modules as they are at Remote IPE modules or small cabinets.
Furthermore, because Remote IPE equipment uses common and network
equipment from the local system, subscriber functions and features are
the same at local and remote sites.
Figure 19 "Large System to Remote IPE site" (page 60) illustrates the
fiber-optic connection between a local system and remote system.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Large System Overview
NN43021-110 01.03 Standard
Release 5.0 18 February 2008
Copyright © 2003-2008, Nortel Networks
.