NEC PlasmaSync 3300 - Manual (Page 8)

7
8
D VIDEO 2
VIDEO 2 IN (BNC type)..... Connect the video source' s output here.
S-VIDEO 2 IN..... Connect the S-video source with an S-connector output
here.
THROUGH OUT (BNC type)..... Connect to a second monitor' s video input to
relay the video signal input at VIDEO 2 IN.
THROUGH OUT (S-VIDEO)..... Connect to a second monitor' s S-connector
input to relay the video signal input at S-VIDEO 2 IN.
75 Ω /HIGH Impedance Select Switch..... Set to "75
Ω
" during normal opera-
tion. In multiple connections using VIDEO 2 IN and THROUGH OUT termi-
nals, set to "HIGH" on all but the last monitor. Set to "75 Ω " on the last
monitor only.
AUDIO R IN..... Connect the stereo right channel audio output here.
AUDIO L IN (MONO)..... Connect the mono audio or stereo left channel audio
output here.
AUDIO R THROUGH OUT..... Connect to a second monitor' s audio right chan-
nel input.
AUDIO L THROUGH OUT..... Connect to a second monitor' s audio left channel
input.
D
E F
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
E RGB 1
Mini D-SUB 15 PIN IN..... A15 Pin Analog RGB 1 input terminal compatible
with computers that have a VGA/S-VGA/XGA output signal.
D-SUB 15 PIN THROUGH OUT..... Connect to an RGB INPUT terminal on an-
other monitor.
75 Ω /HIGH Impedance Select Switch..... Set to "75
Ω
" during normal operation.
Set to "HIGH" when using the D-SUB 15 PIN THROUGH OUT RGB 1 termi-
nal.
F RGB AUDIO
AUDIO R IN..... Connect the audio right channel output of the RGB source.
AUDIO L IN..... Connect the mono audio or stereo left channel output of the
RGB source.
AUDIO R THROUGH OUT..... Connect to a second monitor' s audio right chan-
nel RGB input.
AUDIO L THROUGH OUT..... Connect to a second monitor's audio left channel
RGB input.
1 2 3 4 5
11 12 13 14 15 6 7 8 9 10
1 2 3 4 5
11 12 13 14 15 6 7 8 9 10