beautypg.com

Mini d-sub 15 pin rgb signal composition, Rgb signal connections – NEC PlasmaSync 3300 User Manual

Page 16

background image

Mini D-Sub 15 Pin RGB Signal Composition

Pin Assignments and Signal Levels for 15 pin RGB (Analog)

1

2

3

4

5

11

12

13

14

15

6

7

8

9

10

Signal to be connected

Loop through output

RED

RED

GREEN or Sync. on Green

GREEN or Sync. on Green

BLUE

BLUE

GND

GND

GND

GND

RED (GND)

RED (GND)

GREEN (GND)

GREEN (GND)

BLUE (GND)

BLUE (GND)

No Connection

No Connection

SYNC (GND)

SYNC (GND)

GND

GND

SDA

No connection

H. or Composite sync

H. or Composite sync

V.SYNC

V.SYNC

SCL

No connection

Pin No.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

RGB Signal Connections

RGB 1 INPUT Connections

Mini D-SUB 15 Pin RGB Connector.

1. Connect external components or computers having RGB output to the mini

D-SUB 15-Pin connector.

2. Connect the external RGB component mono audio or stereo left channel

audio output to L RGB AUDIO IN (MONO).

3. Connect the external RGB component stereo right channel audio output to

R RGB AUDIO IN.

RGB 2 INPUT Connections

Connect external components with R.G.B.H/CS and V output to the R.G.B.H/

CS and V analog input terminals.

NOTE: ''Plug and Play'' is not available during use of the RGB 2 BNC termi-

nals.

THROUGH OUT (RGB 1) Connections
Monitor Connection

Connect mini D-SUB 15 PIN THROUGH OUT to an RGB input connector of

other monitors.

THROUGH OUT (RGB 2) Connections

1. Connect the R.G.B.H/CS and V THROUGH OUT terminals to relay the sig-

nal input at the R.G.B.H/CS and V IN terminals.

24

23

2. Set all the 75

/HIGH impedance select switches on all but the last monitor

to “HIGH” position. On only the last monitor set all of them to “75

” position.

NOTE: The connection of three PlasmaSync 3300 monitors or more with

THROUGH OUT (RGB 1 or 2) terminals may degrade image quality.

NOTE: ''Plug and Play'' is available only for the monitor connected directly

to a personal computer with the D-Sub 15 PIN IN RGB connector. Therefore,

''Plug and Play'' does not work for monitors connected with the THROUGH

OUT terminal. This is because only the RGB video, the horizontal, or the

vertical sync. signal is output from the THROUGH OUT terminals.