National Instruments Instrument Driver NI-DMM - Manual (Page 6)

NI-DMM Instrument Driver Quick Reference 6 ni.com
Actual Values
ICON TYPE PARAMETER VALUE TO SET, COMMENTS
ViSession vi Session handle
ViReal64* autoRange Value Output
ViSession vi Session handle
ViReal64* Aperture Time Output
ViInt32* Aperture Time Output (seconds or PLC)
Units
ViSession vi Session handle
ViReal64* Measurement Output (seconds)
Period
Acquisition
ICON TYPE PARAMETER VALUE TO SET, COMMENTS
ViSession vi Session handle
ViInt32 Maximum Time Milliseconds
ViReal64* Measurement Output
ViSession vi Session handle
ViInt32 Maximum Time Milliseconds
ViInt32 Number to Read Default = 4
ViReal64 [ ] Measurements Output
ViInt32* Actual Number Output
niDMM Read Multi Point
(niDMM_ReadMultiPoint)
Acquires multiple measurements and returns an array of measured values.
niDMM Read
(niDMM_Read)
Acquires a single measurement and returns the measured value.
niDMM Get Measurement Period
(niDMM_GetMeasurementPeriod)
Returns the measurement period, which is the amount of time it takes to complete
one measurement with the current configuration.
niDMM Get Aperture Time Info
(niDMM_GetApertureTimeInfo)
Returns the aperture time and aperture time units.
niDMM Get Auto Range Value
(niDMM_GetAutoRangeValue)
Returns the actual range that the DMM is using, even when auto ranging is off.
322614f.qxp 11/23/2004 10:13 AM Page 6