National Instruments Instrument Driver NI-DMM - Manual (Page 5)

5 NI-DMM Instrument Driver Quick Reference
Triggers
ICON TYPE PARAMETER VALUE TO SET, COMMENTS
ViSession vi Session handle
ViInt32 Trigger Source Default = Immediate
ViReal64 Trigger Delay Default = Auto
ViSession vi Session handle
ViSession vi Session handle
ViInt32 Trigger Slope
ViSession vi Session handle
ViInt32 Slope
ViSession vi Session handle
ViInt32 Measurement Default = None
Complete
Destination
ViSession vi Session handle
ViInt32 Slope
niDMM Configure Meas Complete Slope
(niDMM_ConfigureMeasCompleteSlope)
Sets the MC signal to either rising edge or falling edge polarity.
niDMM Configure Meas Complete Dest
(niDMM_ConfigureMeasCompleteDest)
Specifies the destination of the Measurement Complete (MC) signal.
niDMM Configure Sample Trigger Slope
(niDMM_ConfigureSampleTriggerSlope)
Sets the Sample Trigger Slope property to either rising edge or falling edge polarity.
niDMM Configure Trigger Slope
(niDMM_ConfigureTriggerSlope)
Sets the Trigger Slope property to either rising edge or falling edge polarity.
niDMM Send Software Trigger
(niDMM_SendSoftwareTrigger)
Sends a command to trigger the DMM.
niDMM Configure Trigger
(niDMM_ConfigureTrigger)
Configures the DMM trigger source and trigger delay.
© National Instruments Corporation
322614f.qxp 11/23/2004 10:13 AM Page 5