NetComm 802.11 - Manual (Page 44)

Power n Series User Guide YML800NX
www.netcomm.com.au
IP Filter
Enable IP Filtering: Check to enable or disable IP Filtering.
Deny: If you select “Deny” then all clients will be allowed to access Internet except for the clients in the list below.
Allow: If you select “Allow” then all clients will be denied to access Internet except for the PCs in the list below.
Add PC IP Address
You can click PC to add an access control rule for users by an IP address or IP address range.
Remove PC IP Address
If you want to remove some PC IP from the , select the PC you want to remove in the table and
then click . If you want to remove all PCs from the table, just click the button.
Click at the bottom of the screen to save the above configurations.