NetComm 802.11 - Manual (Page 28)

Power n Series User Guide YML800NX
8 www.netcomm.com.au
Internet
Status
This page shows the current Internet connection type and status
Dynamic IP
Use the MAC address when registering for Internet service, and do not change it unless required by your ISP. If
your ISP used the MAC address of the Ethernet card as an identifier, connect only the PC with the registered MAC
address to the broadband router and click the button. This will replace the current MAC
address with the already registered Ethernet card MAC address
Host Name: This is optional.
MAC address: The default value is set to the WAN’s physical interface of the broadband router.