NetComm 802.11 - Manual (Page 37)

YML800NX Power 800NX Power X Power Power n User Guide
www.netcomm.com.au
802.11n Wireless Router
MAC Address Filtering
This wireless router supports MAC Address Control, which prevents unauthorized clients from accessing your
wireless network.
Enable wireless access control: Enable the wireless access control function
Adding an address into the list
Enter the “MAC Address” and “Comment” of the wireless station to be added and then click . The wireless
station will now be added into the “Current Access Control List” below. If you are having any difficulties filling in
the fields, just click “Clear” and both “MAC Address” and “Comment” fields will be cleared.
Remove an address from the list
If you want to remove a MAC address from the “Current Access Control List “, select the MAC address that you
want to remove in the list and then click “Delete Selected”. If you want to remove all the MAC addresses from the
list, just click the button. Click will clear your current selections.
Click at the bottom of the screen to save the above configurations.