beautypg.com

Using the flash, A 29), A 29 – Nortel Networks L110 User Manual

Page 41

background image

29

Bas
ic Ph

otography an

d Pl
ayba

ck

: G
Easy Aut

o

M

o

d

e

Using the Flash

In dark locations or when the subject is backlit, you can shoot pictures with flash
by raising the built-in flash.
The flash has a range of about 0.5 to 5.5 m (1 ft. 8 in. to 18 ft.) when the camera is

zoomed out all the way, and about 1.5 to 3.5 m (5 ft. to 11 ft.) when the camera
is zoomed in all the way.

If the built-in flash is raised when using easy auto mode (A 20), the camera

automatically sets a flash mode according to the determined scene mode.
When the built-in flash is lowered, the flash setting changes to off and W is
displayed at the top of the monitor.

Selecting a Flash Mode

When using Auto mode (

A 48), certain scene modes (A 35), or smart portrait

mode (

A 44), the following flash modes are available.

1

Raise the built-in flash (A 6).

When the built-in flash is lowered, it is fixed to W

(off).

U

Auto

Flash fires automatically when lighting is poor.

V

Auto with red-eye reduction

Reduces “red-eye” in portraits (

A 31).

W

Off

Flash will not fire even when lighting is poor.

X

Fill flash

Flash fires when a picture is taken. Use to “fill-in” (illuminate) shadows and back-lit
subjects.

Y

Slow sync

Auto flash mode is combined with slow shutter speed.
Flash illuminates main subject; Slow shutter speeds are used to capture background
at night or under dim light.