Nortel Networks L110 - Manual (Page 117)

105
Setup Menu
Basi
c Came
ra Setup
U Motion Detection
Specify whether or not motion detection is used to reduce the effects of subject
movement and camera shake when taking still pictures.
The motion detection setting can be confirmed in the monitor during shooting
(
A 21).
When the camera detects shaking and increases shutter speed, the motion
detection indicator turns green. When set to
Off, no icon is displayed.
Press the d button M z (Setup menu) (A 94) M U Motion detection
U Auto (default setting)
When the camera detects subject movement or camera shake, the ISO sensitivity
and shutter speed are automatically increased to reduce blurring.
Note that motion detection is not active in the following situations:
• When the flash is set to X (fill flash)
• When the ISO sensitivity option (A 56) is set fixed at a particular value in
A (auto) mode
• When using Multi-shot 16 (A 55)
• In the following scene modes: Night portrait (A 37), Dusk/dawn (A 38),
Night landscape (A 39), Museum (A 40), Backlight (A 41)
• When using Sport Continuous mode (A 46)
Off
Motion detection is not enabled.
B
Notes on Motion detection
• Blurring caused by camera shake or subject movement may not be eliminated depending on
shooting conditions.
• Motion detection may not function if the subject exhibits significant movement or is too dark.
• The images taken may become somewhat grainy.