Error messages – Nortel Networks L110 User Manual
Page 136
124
Techn
ic
al Not
es
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display
Problem
Solution
A
O (blinks)
Clock not set.
Set clock.
B
Battery running low.
Prepare to replace batteries. 14, 114
N
Battery exhausted.
Battery exhausted.
Replace batteries.
P
Battery temperature
high
Battery temperature is high. Turn off camera, and allow
battery to cool down before
resuming use. After 5
seconds, this message will
disappear, the monitor will
turn off, and the power-on
lamp and flash lamp will
blink rapidly. After the
lamps blink for three
minutes, the camera will
turn off automatically.
Pressing the power switch
also turns off the camera.
Q (blinks red)
Camera cannot focus.
• Refocus.
• Use focus lock.
P
Please wait for the
camera to finish
recording.
Camera cannot perform
other operations until
saving is complete.
Wait until message clears
from display automatically
when saving is complete.
N
Memory card is write
protected.
Write-protect switch is in
“lock” position.
Slide write-protect switch to
“write” position.
P
This card cannot be
used.
Error accessing memory
card.
• Use approved card.
• Check that connectors
are clean.
• Confirm that memory
card is correctly inserted.
P
This card cannot be
read.