NorthStar Navigation Explorer 660 - Manual (Page 42)

Northstar Explorer 660 Installation and Operation Manual 42
10 Data display
The data display has eight large numeric data
fields, four lines with two fields per line, plus a
graph of the water temperature and depth over
the last 20 minutes.
To show the data display, press DISPLAY, select
Other, then select Data.
To select what data is displayed:
1 Press MENU and select Data setup.
2 Change a data field:
i Press the cursor keys to highlight the
field.
ii Press ENTER to display a menu of the
data that can be shown in the field.
iii Select the data to show in the field; select
None to leave the field empty.
3 Repeat the above step to set the other data
fields.
4 Press ESC.