56/64k csu/dsu wan interface card, Figure 20, Table 17 – Nortel Networks Accelar 1050 User Manual
Page 49: 1000base-t (1000 gt) ethernet pinouts
![background image](/manuals/191164/49/background.png)
Appendix A Technical specifications 49
Nortel VPN Router Installation — VPN Router 1010/1050/1100
The following table provides the pinouts for the 1000BASE-T (1000 GT) Ethernet
interface card..
56/64K CSU/DSU WAN interface card
The 56/64K CSU/DSU WAN interface card has a single RJ-48 connector that
provides the signals needed to interface to network equipment.
shows
the 56/64K CSU/DSU WAN interface card.
Figure 20
56/64K CSU/DSU WAN interface card
The connector on the 56/64K CSU/DSU WAN interface card accommodates an
8-pin RJ-48 modular patch cord. These cables are sold as Category 5, or Ethernet,
cables.
Table 17
1000BASE-T (1000 GT) Ethernet pinouts
Pin
Description
1
TP0+
2
TP0-
3
TP1+
4
TP2+
5
TP2-
6
TP1-
7
TP3+
8
TP3-
Note: Nortel does not supply an interface cable with the
56/64K CSU/DSU WAN interface card.
CS260010A
12345678
10972EA
56/64K
DDS