Figure 18, Vpn router 1100 full-height 1000base-t (1000 gt), Figure 19 – Nortel Networks Accelar 1050 User Manual
Page 48: Vpn router 1100 half-height 1000base-t (1000 gt)
48
Appendix A Technical specifications
NN46110-313 02.01
•
6.05.140 and all subsequent versions
•
7.00.062
•
7.05.100 and all subsequent versions (FIPS branch)
•
7.05.300 and all subsequent versions
The following figures show the full and half-height Ethernet faceplates for the
VPN Router 1100.
Figure 18
VPN Router 1100 full-height 1000BASE-T (1000 GT)
The full-height model is for installation in slot 2; the half-height model is for
installation in slot 3.
Figure 19
VPN Router 1100 half-height 1000BASE-T (1000 GT)
Select cables for this card as follows. Keep in mind that this card is
auto-negotiating and uses the highest possible data rate:
•
For 100BASE-TX operation, use Category 5 twisted-pair wiring: one pair
each for transmit and receive operations. The cable must comply with the
EIA 568 wiring specification. Nortel recommends a maximum length of 100
meters for the cable segment.
•
For 10BASE-T operation, use Category 3, 4, or 5 twisted-pair wiring.