New Holland T7.235 User Manual
Page 21
AUTO PTO OPERATION
Auto PTO can be selected to
automatically disengage the PTO
as the rear linkage is raised above
a pre-set position. This protects the
PTO shaft and tractor. The system
will also reengage drive as the
linkage is lowered.
DIRECT DRIVE FOR FUEL EFFICIENCY
All T7 tractors are fitted with a direct drive PTO to minimise power loss
between engine and implement. The PTO is engaged via a push-pull
control, with advanced Soft Start management. This modulates
engagement of high intertia attachments to protect the driveline.
Speed selection is via mechanical levers; SideWinder II T7.220 and
above feature electronic speed selection. Four speeds: 540, 540E,
1000 and 1000E are available.
STRONG, EFFICIENT AND POWERFUL
The maximum lift capacity on T7.170 to T7.210
tractors is 8,275kg, climbing to a massive 10,463kg
on the T7.220 and above. The rear linkage and
hydraulics are designed to work with heavy mounted
equipment over extended periods. The system also
incorporates integral dynamic ride control shock
load protection. This will reduce bounce when
travelling with a heavy linkage load at transport
speeds. Fender mounted controls for the rear
linkage, a rear remote and the PTO are available.
NH_T7_Brochure.qxd:NH_T7_Brochure 23/5/11 5:26 PM Page 21