NETGEAR MA111 User Manual

Page 66

User Manual for the NETGEAR 11 Mbps Wireless USB Adapter MA111

C-2

Preparing Your PCs for Network Access

202-10032-01

On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

Double-click the Network icon.

The Network window opens, which displays a list of installed components:

You must have an Ethernet adapter or an MA111, the TCP/IP protocol, and the Client for
Microsoft Networks.

If you need to add TCP/IP:

Click the Add button.

Select Protocol, and then click Add.

Select Microsoft.

Select TCP/IP, and then click OK.

If you need to add the Client for Microsoft Networks:

Click the Add button.

Select Client, and then click Add.

Select Microsoft.

Select Client for Microsoft Networks, and then click OK.

If you need to add File and Print Sharing for Microsoft Networks:

Note:

It is not necessary to remove any other network components shown in the

Network window in order to install the adapter, TCP/IP, or Client for Microsoft
Networks.