Snmp (simple network management protocol), Security, Upgrade feature set – Netopia 4752 User Manual
Page 79: Snmp (simple network management protocol) -21, Security -21, Upgrade feature set -21
WAN and System Configuration 9-21
To go to the Console Configuration screen, select Console Configuration in the System Configuration screen.
Follow these steps to change a parameter’s value:
1.
Select the parameter you want to change.
2.
Select a new value for the parameter. Return to step 1 if you want to configure another parameter.
3.
Select SET CONFIG NOW to save the new parameter settings. Select CANCEL to leave the parameters
unchanged and exit the Console Configuration screen.
SNMP (Simple Network Management Protocol)
These screens allow you to monitor and configure many of the data routing features of your network by means
of a standard Simple Network Management Protocol (SNMP) agent.
■
Details are given in
Security
These screens allow you to add users and define passwords on your network.
■
Details are given in
Upgrade feature set
You can upgrade your Netopia 4752 by adding new feature sets through the Upgrade Feature Set utility.
See the release notes that came with your device or feature set upgrade, or visit the Netopia Web site at
www.netopia.com for information on new feature sets, how to obtain them, and how to install them on your
Netopia 4752.
Console Configuration
Baud Rate... 57600
Hardware Flow Control: No
SET CONFIG NOW CANCEL