Nortel Networks Cartridge - Manual (Page 31)

31
Release Notes and Cartridge Installation Guide for BCM3.7
Drop-down list not available
In NCM 3.0, under IP Firewall Filters > LAN/WAN/UTWAN > Destination
Port Range, a drop-down menu is not available because it is located in Unified
Manager. You must type in the label of the port, port number, or port range. (CR
Q00671770)
Naming conventions do not match Unified Manager
Naming conventions for dial-up items, such as Modem and ISDN interfaces in the
Resources node, do not match the names found in Unified Manager. In NCM, the
convention is Interface ID .
Password change wizard
When the export checkbox in the Password Change wizard is selected, the
password is changed on the physical device. However, the device representation
in NCM still contains the old password within its connection parameters. (CR
Q00531581)
Log rotators after migration
Log rotator settings are not migrated from NCM 2.0 to NCM 3.0. Instead, default
log rotator settings are created when the NCM 3.0 database is created originally.
Server messages incorrectly formatted in File > Send
When selecting multiple Common Files to send to the network, the operation’s
server log message combines all the file names into one string, and the message is
formatted as though the multiple files are a single file. (CR Q00741834)
Wrong filename shown after using Browse function
When sending Common Files to the network, you have the option of using
Browse to select Configuration Data devices. However, when you use the Browse
function, the progress label displays “sending file to null.” (CR Q00732291)