Nortel Networks Cartridge - Manual (Page 25)

25
Release Notes and Cartridge Installation Guide for BCM3.7
Erroneous error message when exporting changes to
callback settings
NCM will display an error message in a dialog box at the end of an export of
either an enable or disable of Callback settings to BCM. Ignore the error message,
as the changes are reflected in the BCM after the export. (CR Q00995003)
IPSec Branch Office Tunnel support
NCM Branch Office Tunnel wizard, visible only in NCM node Services > VPN >
IPSec > Branch Office Accounts, is not supported. This wizard does not
configure correctly branch office IPSec tunnels on BCMs.
IPSec branch office tunnels must be created and enabled through the Unified
Manager on the BCM.
NCM can import existing IPSec branch office tunnels, and can be used to modify
and export IPSec branch office tunnels that had previously been imported from a
BCM. (CR Q00998229) (CR Q00998224)
IPSec Remote User Account support
NCM BCM IPSec Remote User Account Wizard, visible only in the NCM node
Services > VPN > IPSec > Remote User Accounts, is not supported. This wizard
does not configure correctly remote user accounts.
IPSec remote user accounts must be created through Unified Manager on the
BCM.
NCM can import existing IPSec remote user accounts, and are used to modify and
export IPSec remote user accounts previously imported from a BCM. (CR
Q00998231)
PPTP tunnel wizard support
NCM BCM PPTP Tunnel Wizard, visible only in the NCM node Services > VPN
> PPTP, is not supported. This wizard does not configure correctly PPTP
tunnels.