beautypg.com

Nokia 3108 User Manual

Page 77

background image

M e n u f u n c t i o n s

66

Copyright © 2004 Nokia. All rights reserved.

saved in the security module by the
service provider.

Press

Menu

and select

Services

,

Settings

,

Security settings

and

Security module settings

. Select

Security module details

to show

the security module title, its
status, manufacturer and serial
number.

Module PIN request

to set the

phone to ask for the module PIN
when using services provided by
security module. Key in the code
and select

On

. To disable the

module PIN request, select

Off

.

Change module PIN

to change

the module PIN, if allowed by the
security module. Enter the
current module PIN code, then
enter the new code twice.

Change signing PIN

. Select the

signing PIN you want to change.
Enter the current PIN code, then
enter the new code twice.

See also

”General information”

on

page

ix

.

Certificates

There are three kinds of certificates:
server certificates, authority
certificates and user certificates.

• The phone uses a server

certificate to improve security in
connection between the phone
and the gateway. The phone
receives the server certificate
from the service provider before

the connection is established and
its validity is checked using the
authority certificates saved in the
phone. Server certificates are not
saved.

The security indicator

is

displayed during a connection, if
the data transmission between
the phone and the gateway
(identified by the

IP address

in

the

Edit active service settings

-

Bearer settings

) is encrypted.

However, the security indicator
does not indicate that the data
transmission between the
gateway and the content server
(place where the requested
resource is saved) is secure. It is
up to the service provider to
secure the data transmission
between the gateway and the
content server.

• Authority certificates are used by

some services, such as banking
services, for checking the validity
of other certificates. Authority
certificates can either be saved in
the security module by the
service provider, or they can be
downloaded from the network, if
the service supports the use of
authority certificates.