Nextel comm I700PLUS NTN9368-A - Manual (Page 71)

Nextel Direct Connect®
63
Placing Private Calls
From Private mode, there are also two ways to reach an individual
using Nextel Direct Connect. You can enter the person’s Private ID
number then press the Push-To-Talk button. Or, you can store the
person’s name and Private ID number, then recall the number from a
stored list. Whether you dial the person’s Private ID directly or store it
in a list—you must have the individual’s Private ID to use Nextel Direct
Connect. To learn how to store names and numbers, see “Storing Names
and Numbers” on page 17.
Entering the Private ID
Selecting a Name from a Stored List
NOTE: You may receive certain display messages when making a
Direct Connect call. See “Understanding Status Messages” on
page 111.
1 Press N until you see Prvt Ready.
2 Enter the Private ID.
3 Press and hold the Push-To-Talk button on the side of the phone
to talk. Both phones will chirp before your voice can be heard.
4 Release the Push-To-Talk button to listen.
1 Press N until you see Prvt Ready.
2 Press Q to scroll through the names.
Or, press M until “Name” appears. Press P under “Name”
and enter the first initial of the name then press Q to
scroll through the names.
3 Press and hold the Push-To-Talk button on the side of the phone
to talk. Both phones will chirp before your voice can be heard.
4 Release the Push-To-Talk button to listen.
NextelUG_i700.fm Page 63 Friday, June 16, 2000 3:15 PM