Nextel comm I700PLUS NTN9368-A - Manual (Page 100)

92
www.nextel.com
Using Phone, Mail and Group/Prvt Vibrate Option
To use Phone Vibrate, Phone Vibrate/Ring, Mail Vibe or Group/
Prvt Vibe follow the steps below:
Programming Menus
You can customize the settings on your phone using the Programming
menus. Many of them have been discussed throughout this guide.
You can access this menu from the Phone, Private, or Group modes.
1 Press * then # then 9.
2 Press M until you see the “Selct” option.
3 Press P under “Selct”. The first selection is Phone Vibrate:.
Then press Q to scroll to Mail Vibe:, then Group/Prvt
Vibe:. To use Phone Vibrate/Ring, from Phone Vibrate: dis-
play, press M then press P under “V/Rng”.
4 Press P under “On” or “Off” (whichever is applicable).
5 Press P under “Exit”.
1 Press M until you see the “Prgm” option.
2 Press P under “Prgm”.
3 Press P under “OK”.
4 Press Q to scroll the Programming menu options.
Or, enter the option using the Programming Menus Shortcut on
page 93.
NextelUG_i700.fm Page 92 Friday, June 16, 2000 3:15 PM