NETGEAR DM602 - Manual (Page 23)

Reference Manual for the Model DM602 ADSL Modem
Setting Up the Hardware 2-9
1. Install the USB driver
a. Insert the CD which came with your modem into the CD drive of your computer.
Figure 2-5. CD Startup Screen
b. Click the INSTALL USB Driver button.
c. If a message prompts to save or open the file, click Open to launch the setup.exe utility.
d. Follow the setup wizard prompts to install the USB driver and click Finish when done.
2. Turn on the modem and connect your computer to the modem with the USB cable.
The found new hardware Windows installation wizard will prompt you for the drivers
a. Follow the Windows prompts to complete the installation of the modem.
b. Browse to the CD and install the USB driver by clicking through the Windows wizard
prompts.
You have now finished connecting your modem.
DM602.book Page 9 Friday, October 4, 2002 4:22 PM