NISSAN CVT SIC0697 - Manual (Page 176)

WARNING
Do not use the cruise control when driv-
ing under the following conditions:
¼ it is not possible to keep the vehicle
at a set speed.
¼ in heavy traffic or in traffic that varies
in speed.
¼ on winding or hilly roads.
¼ on slippery roads (rain, snow, ice,
etc.).
¼ in very windy areas.
Doing so could cause a loss of vehicle
control and result in an accident.
PRECAUTIONS ON CRUISE
CONTROL
¼ If the cruise control system malfunctions, it
cancels automatically. The SET indicator light
on the meter panel then blinks to warn the
driver.
¼ If the SET indicator light blinks, turn the
cruise control main switch off and have the
system checked by your NISSAN dealer.
¼ The SET indicator light may blink when the
cruise control main switch is turned on while
pushing the ACCEL/RES, COAST/SET, or
CANCEL switch (located on the steering
wheel). To properly set the cruise control
system, perform the preceding steps in the
order indicated.
1. ACCEL or RESUME switch
2. COAST or SET switch
3. ON/OFF switch
4. CANCEL switch
CRUISE CONTROL OPERATIONS
The cruise control allows driving at a speed
between 25 to 89 MPH (40 to 144 km/h)
without keeping your foot on the accelerator
pedal.
To turn on the cruise control, push the main
switch on. The CRUISE indicator light on the
meter panel will come on.
SSD0297
CRUISE CONTROL (if so
equipped)
Starting and driving 5-19
੬ 04.4.5/Z50-D/V5.0 ੭