Nokia X6-00 - Manual (Page 185)

Create a server profile
Select Options > Server profiles > Options > New server profile .
Delete a server profile
Select Options > Delete .
Security settings
Phone and SIM
Select Menu > Settings and Phone > Phone mgmt. > Security > Phone and SIM
card .
Select from the following:
PIN code request — When active, the code is requested each time the device is
switched on. Deactivating the PIN code request may not be allowed by some SIM
cards.
PIN code andPIN2 code — Change the PIN and PIN2 code. These codes can only
include numbers. Avoid using access codes similar to the emergency numbers to
prevent accidental dialling of the emergency number. If you forget the PIN or PIN2
code, contact your service provider. If you forget the lock code, contact a Nokia Care
point or your service provider.
Lock code — The lock code is used to unlock the device. To avoid unauthorised use
of your device, change the lock code. The preset code is 12345. The new code can
be 4-255 characters long. Alphanumeric characters and both uppercase and
lowercase characters can be used. The device notifies you if the lock code is not
properly formatted. Keep the new code secret and separate from your device.
Phone autolock period — To avoid unauthorised use, you can set a time-out after
which the device automatically locks. A locked device cannot be used until the
correct lock code is entered. To turn off autolock, select None .
Settings 185
© 2009 Nokia. All rights reserved. 185