Nortel Networks IP Phone 2001 - Manual (Page 24)

Configuring options
24
Selecting local dialpad tone
Use the Local DialPad Tone option if you want the telephone dialing keys
to produce a sound when you press them. Your choices are:
• Dual Tone Multi-Frequency (DTMF) sounds
• a single tone
• no sound.
To choose a local dialpad tone, press the Services key and select Local
DialPad Tone from the Telephone Options menu.
To select local dialpad tone:
Selecting a Ring type
Use the Ring type option to configure the telephone’s ring tone. To
choose a ring type, press the
Services key and select Ring type… from
the Telephone Options menu.
1. Press the Navigation keys to scroll and
highlight one of the following dialpad
tones:
— None to disable all tones.
— Short Click to enable a single tone
for all keys.
— DTMF to turn on a separate DTMF
tone for each key.
2. Choose one of the following:
— Press the Select soft key to save the
tone selection and return to the
Telephone Options menu.
— Press the Cancel soft key to keep
existing configurations.
or