Nortel Networks C3060 - Manual (Page 28)

28
Note: If you press CALL , and you want to use your active softkeys,
press EXIT .
Depending on your voice mail system, you may be required to
change the dial codes. Dial codes are the numbers used to access
voice mail system features. For example, the default dial code 76
deletes a message. If your voice mail system is Meridian Mail,
you do not have to change the dial codes. If you change your
message service code, you will have to change the dial codes as
required.
To store your message service code
1. Select Msg service #,
CODE .
2. Enter ___________ (your voice mail service access
number) and insert one or more pauses as required (See
Pause and link signal page 13).
3. Enter __________ (your voice mailbox number and
password) and press SAVE .
Note: Your voice m ail system m ay require you to press # after you
enter your m ailbox num ber or password.