Nokia XPRESS-ON 3125 - Manual (Page 70)

S e t t i n g s ( M e n u 5 )
60 Copyright © 2004 Nokia. All rights reserved.
of an incoming call even while you
are in a call. You can then accept,
reject, or ignore the incoming call.
1. During a call, press Answer or the
Talk key to answer the waiting
call.
The first call is put on hold.
2. Press the End key to end the
active call.
Send own caller ID when
calling
If your wireless service provider
supports this feature, then you can
prevent your number from appearing
on the receiving party’s caller ID.
At the standby mode, select Menu >
Settings > Network services > Send
my caller ID > Yes or No .
Store a feature code
1. At the standby mode, select
Menu > Settings > Network
services > Network feature
setting .
2. Enter the feature code from your
service provider (for example,
*633 for activating
Divert if busy ),
and press OK .
3. Press Select when Call diverting
is displayed.
4. Scroll to the type of diverting
that matches the feature code
you entered (for example,
Divert
if busy ), press Select > Activate .
The activated feature code is now
stored in your phone, and you are
returned to the
Feature code:
field. Continue entering other
feature codes (for example, *633
to cancel
Divert if busy ), or press
the End key to return to the
standby mode.
Note: Once you enter a
network feature code
successfully the feature
becomes visible in the
Network services menu.
View your own phone
number
At the standby mode, select Menu >
Settings > Network services > Own
number selection .
■ Restore factory settings
You can reset some of the menu
settings to their original values. Data
that you have entered or
downloaded is not deleted, for
example, entries in your contacts list
are not affected.
1. At the standby mode, select
Menu > Settings > Restore
factory settings .
2. Enter the security code, and press
OK . (See Security code, 57 for
more information.)