Make calls, Receive data or fax calls – Nokia XPRESS-ON 3125 User Manual

Page 59

S e t t i n g s ( M e n u 5 )

Note: Contact your calling
card company for more
information.

Make calls

After you have saved your calling
card information in your phone, you
can make a call using your calling
card.

1. At the standby mode, select

Menu

Settings

Call settings

Calling card

2. Enter your security code, and

press

. (See

Security code, 57

for more information.)

3. Scroll to the calling card of your

choice, select

Options

Select

4. Press the End key to return to the

standby mode; then enter the
phone number, including any
prefix (such as 0 or 1) that your
calling card may require when
you make a calling card call.

See your calling card for
instructions.

5. Press and hold the Talk key for a

few seconds until

Card call

displayed.

6. When you hear the tone or

system message, press

Receive data or fax calls

Data or fax calls is a network service.
See

Network services, ix

for more

information.

If your wireless service provider
supports this feature, you can set up
the phone to send or receive data or
fax calls when a terminal, such as a
PDA or PC, is connected.

For better performance during data
calls, place the phone on a
stationary surface. Do not move the
phone by holding it in your hand
during a data call.

Note: For more information
on connectivity, refer to the
PC/PDA Connectivity Guide.
The PC/PDA Connectivity
Guide can be downloaded
from the Nokia website at
http://www.nokia-
asia.com/.

1. At the standby mode, select

Menu

Settings

Call settings

Data/fax calls

Incoming data/

fax call

Normal

Data calls only

Fax calls only

Normal

—The phone receives

incoming calls as usual.

Data calls only

—The phone

receives only data calls.

Fax calls only

—The phone

receives only fax calls.

2. When you are finished receiving

the fax or data call, repeat step 1
and select

Normal