2 add and edit trigger mapping, Add and edit trigger mapping – Psion Teklogix NEO PX750 User Manual

Page 112

Text mode
Original mode

Chapter 5: Configuration
Manage Triggers

100

Psion Teklogix NEO Hand-Held Computer User Manual

5.5.6.2 Add And Edit Trigger Mapping

These dialogs allow the user to add and edit trigger mappings.

Trigger Key
This drop-down list allows you to specify the source of the trigger events, such as the Ex-
pansion port trigger, Soft Scan and Scan for the trigger module selected.

Note: It is possible to map the same source to different modules (trigger consumers) – for

example, to both the Imager and Non-Decoded Scanner. If so, both devices/opera-

tions will occur simultaneously. This is not recommended in most cases, especially

with devices such as Imagers.
It is also possible to map different sources to the same module (trigger consumer).