4 advanced, 5 devices, Advanced – Psion Teklogix NEO PX750 User Manual
Page 107: Devices
Chapter 5: Configuration
Power Properties
Psion Teklogix NEO Hand-Held Computer User Manual
95
5.5.4.4 Advanced
Allow Suspend With:
This tab allows you to specify whether or not your unit will enter Suspend state while it is
operating with an active PPP connection, network interface or active TCP/IP connection.
Low Power Warnings
The sliding scale at the bottom of this tab allows you to specify the remaining battery capac-
ity at which a warning message is displayed on the screen, from 0% to 20%.
5.5.4.5 Devices
This tab controls power to individual SDIO slot, and built-in devices. Enable or disable the
checkboxes as needed, then tap on OK to save your changes.