Psion Teklogix NEO PX750 - Manual (Page 111)

Chapter 5: Configuration
Manage Triggers
Psion Teklogix NEO Hand-Held Computer User Manual 99
Double-Click
When a key is pressed and released, then pressed again within the configured time (between
0 to 1000 milliseconds), a double-click occurs. See also “Trigger-Press Type” on page 101.
Show All Modules
By default, the trigger mapping list only shows active mappings. Mappings for drivers or
applications that are not currently active are not normally displayed. By checking this
checkbox, all mappings, both active and inactive, are displayed.
Add
Tapping this button brings up the Add Mapping dialog (see “Add And Edit Trigger Map-
ping” on page 100), so that you can add new trigger mappings.
Edit
Tapping this button brings up the Edit Mapping dialog (see “Add And Edit Trigger Map-
ping” on page 100), so that you can edit existing trigger mappings.
Remove
Tapping this button removes an existing mapping.
OK
The OK button in the top right of the Manage Triggers screen saves all changes made. If the
cancel button X is tapped instead, or the [ESC] key is pressed, all changes will be discarded.
Important: It is not possible to have two or more identical mappings—for example [F1]
cannot be mapped to the Non-Decoded Scanner twice—even if the trigger
type is different.
A keyboard key that is used as a trigger source will no longer generate key
data or perform its normal function. For example, if the space button is
used as a trigger source, it will not be able to send space characters to
applications.